|
|
|
|
Maintenance
|
|
|
|
Circulation
-
Replace your pool pump with a more energy-efficient model.
-
New variable speed pumps with permanent magnet motors and digital controls can save as much as 90% in utility costs compared to one- or two-speed pumps with induction motors.
-
If using an energy-efficient one- or two-speed pump, make sure your pump is sized to your pool’s requirements.
-
Reduce run time or speed to reduce energy use.
-
If using a one-speed pump, reduce filtration run time. In general, water needs to be circulated through the filter once every 24 hours.
-
If using a two-speed or variable speed pump, use the lowest speed to appropriately circulate the water. Reducing speed saves more energy than reducing run time.
-
Run your pool's filtration system during off-peak hours when electricity demand is lower, generally between 8 p.m. and 10 a.m. Install a timer or a control system to automate the hours of operation.
-
Keep intake grates clear of debris. Clogged drains require the pump to work harder.
-
To obtain maximum filtration and energy efficiency, backwash or clean your filter regularly, as required.
|
|
|
