|
|
|
Rebar
"Your Pool's Backbone"
|
|
|
Generally, reinforcing steel bars are either carbon-steel (conforming to ASTM A615) or low-alloy steel (conforming to ASTM A706).
Reinforcing bars typically come in two primary grades: Grade 40, which has a minimum yield strength of 40,000 psi, and Grade 60, which has a yield strength of 60,000 psi. The metric equivalents for these are Grade 420, which has equivalent yield strength of 420 MPa (megapascals) and Grade 520, which has an equivalent yield strength of 520 MPa.
Steel Reinforcing bars are produced by pouring molten steel into casters and then running it through a series of stands in the
mill, which shape the steel into reinforcing bars. The cross hatchings, called “deformations,” help transfer the load between concrete and steel.
For buildings, bridges, highways, runways, and Swimming Pools, the cast-in-place concrete “body” and shop-fabricated steel “musculature” of reinforcing bar work in tandem to create one of the most durable and most economical composite materials.
Reinforced concrete is composite material. The concrete provides the material's compressive strength, while the steel - in the form of embedded reinforcing bars - provides tensile strength.
US Imperial Sizes
|
Imperial
Bar Size
|
"Soft" Metric Size
|
Weight (lb/m)
|
Weight (kg/m)
|
Nominal Diameter (in)
|
Nominal Diameter (mm)
|
Nominal Area (in2)
|
Nominal Area (mm2)
|
|
#3
|
#10
|
0.376
|
0.561
|
0.375
|
3
|
0.11
|
71
|
|
#4
|
#13
|
0.668
|
0.996
|
0.5
|
4
|
0.2
|
129
|
|
#5
|
#16
|
1.043
|
1.556
|
0.625
|
5
|
0.31
|
200
|
Most People are not aware that there are different qualities of rebar available. In fact some rebar are almost twice as strong as other rebar. We use only the highest quality Grade 60 Rebar in the construction of our pools. Our centers are never any smaller than 8”, and in some areas we determine to carry additional structural stress we install 4” transitional alternates.
|
|
|
